Information; Language; Video Source - Philips MML1941-PCR User Manual

Information

1) Touch Enter button when the Information is highlighted on Main menu.
The Information window appears:
MML19 Model
D1.15H - 04 - LP03 Firmware Release
h00002
xxxx Warning 1
xxxx Warning 2
3) Touch Enter button to return to Main Menu.
4) Touch the Adjust + or Adjust - button to exit or to select
another item
Note:
Warning 1 can display:
Backlight NC = Backlight Not Calibrated
DVI 5V Over Current = DVI 5 Volt disabled for Over Current
Warning 2 can display:
BaudRate = XXXXX
EOL Backlight ON = End of Life of the Backlight is ON

Language

1) Touch Enter button when the Language is highlighted on Main Menu.
The Language window appears:
The ON SCREEN DISPLAY shows the available languages.
The default is English, but you can select Français, Deutsch, Español or
Italiano.
2) Touch the Adjust + or Adjust - button until the desired item is
highlighted.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item

Video Source

1) Touch Enter button when the Video Source is highlighted on Main
Menu.
The Video Source window appears:
The ON SCREEN DISPLAY shows the following available selections:
- Auto All the video sources are checked automatically
- DVI (Digital Video Input)
- DSUB (D-sub input Video with separated sync./or Sync. On Green).
- BNC (Composite Video with Sync. On Green).
- DVI-A (Digital Video Input - Analog)
2) Touch the Adjust + or Adjust - button until the desired item is
highlighted.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
26
Operating Hours
MML194x