Philips MML1941-PCR User Manual page 35

Auto Phase
1) Touch Enter button when the Auto Phase is highlighted on Advanced
Menu.
The Auto Phase window appears:
2) Touch the Enter button to confirm your selection and run the automatic
adjustment procedure.
3) Touch the Adjust + or Adjust - button to exit or to select another item
NOTE: It is not allowed to run the procedure more than one
time: to execute it again, Exit the item first.
Video Calibration
1) Touch Enter button when the Video Calibration is highlighted on
Advanced Menu.
The Video Calibration window appears:
The ON SCREEN DISPLAY shows the following available choices:
- Offset it is necessary a black pattern (level 1)
- Gain
it is necessary a white pattern (level 254)
- Offset +Gain it is necessary a half black and half white pattern
- Cancel
to exit without execute none calibration
2) Touch the Adjust + or Adjust - button until the desired value appears.
3) Touch the Enter button to confirm your selection.
4) Touch the Adjust + or Adjust - button to exit or to select another item
Restore Factory
1) Touch Enter button when the Restore Factory is highlighted on Advanced Menu.
The Restore Factory window appears:
2) Touch the Enter button to confirm your selection.
3) Touch the Adjust + or Adjust - button to exit or to select another item
MML194x 35