Brightness Key Functions - Philips MML1941-PCR User Manual

Lcd 19” monochrome monitor
Table of Contents

Advertisement

BRIGHTNESS KEY FUNCTIONS

KEY NAME
- BRIGHTNESS ADJ-
- BRIGHTNESS ADJ+
- MENU SELECT -
- MENU SELECT +
- ENTER
- LOGO
MML194x
SYMBOL
DESCRIPTION
☼–
It temporarily decrements the current brightness value, the LED turns
RED if the current brightness value is different from the User
brightness preset. Current brightness can be stored entering the
Brightness preset item in the OSD Service menu.
At power-on the stored brightness User preset value will be reloaded
☼+
It temporarily increments the current brightness value, the LED turns
RED if the current brightness value is different from the User
brightness preset. Current brightness can be stored entering the
Brightness preset item in the OSD Service menu.
At power-on the stored brightness User preset value will be reloaded
Brightness range: • 300 ÷ 700 Cd/m
2
Cd/m
. When Brightness is at 700Cd/m
BRIGHTNESS ADJ+ key pressed for at least 3s, the brightness is
forced to the maximum and the backlight stabilization feature is
disabled; the brightness pop-up window turns up to show this status
(see figure below, on the right).
It moves cursor in OSD menu from left to right and from up to down.
If the freeze feature is enabled, it toggles the image from normal to
frozen and vice versa. When the image is frozen, the LED is orange
and blinking.
It moves cursor in OSD menu from right to left and from down to up.
When used to restore the User brightness preset, the LED turns green
and the brightness pop-up window turns up to show the User default
settings (see figure below, on the right)
It is used to Enter Menu, Sub-menus and items in the OSD.
I
When no video signal is available for the current video source, after
5s the MML194x enters the stand-by mode (the panel is black and the
front LED is orange). Touch ENTER for 1s to switch back to Normal
mode
PHILIPS
When touched for at least 3s, it turns the backlight illumination of the
keypad ON and OFF (toggle mode).
2
, the factory default value is 500
2
, by keeping the
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mml1942-per

Table of Contents