SMC Networks Barricade SMC7904WBRA User Manual page 76

C
ONFIGURING THE
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to
be used by the Barricade and all of its wireless clients. Be sure you
configure all of its clients to the same values.
Parameter
ESSID
ESSID Broadcast Enable or disable the broadcasting of the SSID.
Wireless Mode
Channel
4-32
B
ARRICADE
Description
Extended Service Set ID. The ESSID must be the same on the
Barricade and all of its wireless clients.
This device supports both 11g and 11b wireless networks. Make
your selection depending on the type of wireless network that
you have.
The radio channel used by the wireless router and its clients to
communicate with each other. This channel must be the same
on the Barricade and all of its wireless clients.
The Barricade will automatically assign itself a radio channel, or
you may select one manually.