Nat - SMC Networks Barricade SMC7904WBRA User Manual

C
ONFIGURING THE
To establish a WDS connection between access points, follow the steps
below.
1. Click on the Rescan button to scan and display all wireless devices
within range.
2. Select the wireless devices to which you want to connect by clicking on
an entry, as shown on the AP MAC Address Table (up to 4 APs).
3. Click "SAVE SETTINGS".
Note: See the STATUS/INFORMATION on
page 74 for the WLAN MAC addresses.

NAT

Network Address Translation allows multiple users to access the Internet
sharing one public IP.
4-38
B
ARRICADE