Putting A Call On Hold; Unsuccessful Calls; Emergency Calls - NEC N820 Manual

Accepting a call
Press .
When you use the headset, you can also accept a call by pressing the button on it.
Rejecting a call
Press briefly or close your phone.
When you use the headset, you can also reject a call by pressing and holding the button on it.
You also have options for holding calls and forwarding calls. These options depend on your network and your subscription arrangements.
If your phone receives a call and you do not answer it, the screen will display the phone number (or the name if stored) of the caller (if available). This information is
stored in the missed calls list. Up to 10 missed calls are stored in this list.
You can set your phone to answer a call when any key is pressed (see "Any key answer" on page 36).
If you are making a call, the phone gives priority to receiving a call unless you have already pressed
See also: "Call diversion" on page 11 and "Call waiting and holding" on page 12.
See also: "Call options" on page 10.

Putting a call on hold

You can put the received or dialled call on hold by pressing Softkey 1. To retrieve the call, press Softkey 1 again.

Unsuccessful calls

If dialled call is not successfully connected, the display will give an appropriate message.
If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 13).

Emergency calls

The standard emergency number of 112 can be used.
Key in 1 1 2.
Press to connect the call to the local emergency services.
On some networks, emergency calls can be made using the 112 number without a SIM card inserted.
.
7