Table of Contents
Advertisement
®
T9
Pinyin input (Simplified Chinese)
With a text entry screen displayed, press Softkey 1 until the entry mode is T9
Press 2 to 9 keys to enter a pinyin, based on the normal key mapping. Matching pinyins are displayed in the top row of the T9
Use the
or
key to highlight a pinyin.
If a complete pinyin is highlighted, you may press Softkey 2 to display the Tones.
•
To select a Tone, press the Tone number.
Character candidates are displayed on the candidate bar. (Pressing the
To select a character, press Softkey 1 or 0 and then the character number (1-9), or press and hold the character number for one second.
When a character has been selected, it is copied to the edit field and the cursor moves right to accept the next character.
®
T9
Zhuyin input (Traditional Chinese)
With a text entry screen displayed, press Softkey 1 until the entry mode is T9
Press a key (1-9, , #) to enter a zhuyin, based on the BoPoMoFo key mapping. Matching zhuyins are displayed in the top row of the T9
Use the
or
key to highlight a zhuyin.
If a complete zhuyin is highlighted, you may press Softkey 2 to display the Tones.
•
To select a Tone, press the Tone number.
Character candidates are displayed on the candidate bar. (Pressing the
To select a character, press Softkey 1 or 0 and then the character number (1-9), or press and hold the character number for one second.
When a character has been selected, it is copied to the edit field and the cursor moves right to accept the next character.
Key allocations
Whenever you need to enter text (for short messages, storing names with numbers, etc.), successive presses of an alphanumeric key will display different characters.
®
Pressing
in T9
English text input or Normal text (ABC) input toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
Whenever a text entry screen is displayed, pressing Softkey 1 enables you to select Normal text input (ABC), T9
Symbol mode
In the symbol mode, pressing each key will input a symbol according to its position on the Symbols screen. By pressing
input mode, the Symbol screen will be displayed. Use the
®
Pinyin input.
or
key will display more characters when there are more than 9 candidates.)
®
Zhuyin input.
or
key will display more characters when there are more than 9 candidates.)
and
keys to select the row, and then press the appropriate number on the column of the required symbol.
®
bar.
®
®
Text input (T9) or Numeric input (123).
in a text entry mode other than T9
bar.
®
Zhuyin
17
Advertisement
Table of Contents
