Table of Contents
Advertisement
Taking a picture
Taking a picture
With the standby screen displayed, press
You can also activate the camera function by pressing
Look into the camera view finder screen and adjust the camera position to place the target on the screen.
Hold the camera still, and press
Check the picture. If successfully taken, press
The picture is saved as a JPEG file in the Pictures folder (see page 48).
The default file name for the picture is the date, month, year, hour, minute and second from the date and time settings of your phone.
After taking a picture, pressing Softkey 2 will display a new MMS editor screen with the picture file attached.
If a call comes in while you are checking or saving a photographed image, image storage is cancelled. When this occurs, the next time you select camera function
a message appears to say that you have an image that was not stored, allowing you to check and store the image.
Using the light
With the camera view finder screen displayed, press Softkey 1 to turn the light on or off.
Take care not to hold the light too close to your or other people's eyes when the light is lit.
Zoom
With the camera view finder screen displayed, press the
Controlling brightness
With the camera view finder screen displayed, use the
the left of the status bar area.
to activate the camera function.
8, 0 and 1 from the standby screen.
or the Side up key.
.
or
key to zoom in and out.
and
keys to control the brightness level of the picture. The current brightness level is displayed on
29
Advertisement
Table of Contents
