Table of Contents
Advertisement
Normal mode
Service tone
Vibrator
Auto answer
Always Off
If the selected mode is Car, the backlight will always be turned on. This will reduce battery life.
The default settings shown above may vary. Be sure to check the setting data with your phone.
Editing the Mode settings
With the standby screen displayed, press the
Use the
and
keys to highlight the required mode and press Softkey 1 to display a phone mode edit screen before performing the following procedures.
You can also access the Phone modes screen by pressing
Ringer
With a phone mode edit screen displayed, press 1 to display the list screen that includes the currently set melody.
Use the
and
keys to highlight the desired ringer, and then press
See also: "Sounds" on page 50.
Ringer volume
With a phone mode edit screen displayed, press 2 to display the Ringer volume screen with a volume slider.
Use the
or Side up key to increase or the
corresponding to the key pressed). Or press a number key (0-Quiet to 9-Loud) for the volume level.
Press Softkey 1 to save the current ringer volume setting.
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
The reminder tone volume for scheduler corresponds to the ringer volume.
Msg tone
With a phone mode edit screen displayed, press 3 to display the list screen that includes the currently set melody.
Use the
and
keys to highlight the desired message tone, and then press
See also: "Sounds" on page 50.
40
Meeting mode
On
Off
On
On
Always Off
key.
or Side down key to decrease the volume setting to the level required (the slider moves in the direction
Pocket mode
Car mode
On
On
On
Off
Always Off
On
1 and 2 from the standby screen.
.
.
Advertisement
Table of Contents
