Putting A Call On Hold; Mute; Call Transfer; Multi-Party Calls - NEC N500i User Manual

Depending on the conditions, some options may be displayed in gray and not be available.

Putting a call on hold

☛
To put the received or dialled call on hold, SK1 or

Mute

You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you
can still hear the sound from the other party.
☛
To mute the sound during a call,
The mute function is automatically released after the call ends.
The mute function is not available while using the headset.

Call transfer

When you have an active call and a held call, you can transfer the call and connect the two parties, then you can drop from the line while leaving those
two calls active.
☛
To transfer the call,
After dropping from the call with the other two parties, if you have a call waiting, you can proceed the call with it.
Call transfer facility is SIM dependent.

Multi-party calls

If your SIM card is multi-party enabled, you can make a conference call to more than one caller. To create the multi-party calls, at least 3 parties, including
the host, are needed.
Receiving the second call
☛
SK1 or to accept the second call
When you accept the second call, the first call will be put on hold.
Making the second call
☛
SK1 to put the first call on hold
or 5 to merge both calls to initiate a multi-party call.
3. To retrieve the sound,
4.
➔ SK2 or 5 to merge both calls to initiate a multi-party call.
➔ Key in the phone number
2. To retrieve the call, SK1 or
3 again.
➔ SK1 or to make the second call
2 again.
➔ After the second participant answers, SK2
Basic Calls & Phone Use
9