Normal Text Input; Numeric Input; T9 ® Chinese Stroke Input - NEC N820 Manual

Normal text input

With a text entry screen displayed, press Softkey 1 until the entry mode is Normal text (ABC) input.
Use alphanumeric keys to enter letters. For example, to enter "e", press 3 twice; to enter "f", press 3 three times. For other functions, see the table below.
Key Function
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
0 Inserts a space.
CLR Deletes any character.
or Places the cursor.
Activates symbol mode.
If you have made a mistake, use the
When entering normal (ABC) text, and the character you require is displayed, press the
second, the cursor will move one character to the right automatically).

Numeric input

With a text entry screen displayed, press Softkey 1 until the entry mode is Numeric input.
Use alphanumeric keys to enter numbers.
®
T9 Chinese Stroke input
With a text entry screen displayed, press Softkey 1 until the entry mode is T9
Press to toggle Radical mode on/off. (If ON, an indication appears in the stroke bar.)
Press 1 to 6 to add a stroke to the stroke bar, and display candidate characters.
To select a candidate, press Softkey 1 or 0 and then the character number (1-9), or press and hold the character number for one second. (Pressing the
key will display more characters when there are more than 9 candidates.)
If the radical mode is on, radicals will appear with a dotted line underneath. Select a radical to copy it to the stroke bar, where more strokes may be added.
When a character has been selected, it is copied to the edit field and the cursor moves to the right to accept the next character.
16
keys to place the cursor to the right of the incorrect character and then press CLR.
and
key to move to the next character position (if you wait for more than 1
®
Chinese Stroke input.
or