Table of Contents
Advertisement
false
With the ERS 1600 and 8300, you can change the TACACS+ source IP address by using the
following command.
Config
tacacs
[priority
[source <value>] [sourceIpInterfaceEnabled <value>]
You can change the TACACS+ behavior to support multiplexing sessions over a single TCP
connection (default is false) by using the following command.
Config
tacacs
[priority
[source <value>] [sourceIpInterfaceEnabled <value>]
3.6 TACACS+ Server & Client Log Files
In this section, we will demonstrate TACACS+ server and client accessing a switch. We will demonstrate
a client logging onto a switch, issuing several commands and checking if they are allowed or not based
on authentication rights.
3.6.1 ERS 5500 – Read-Only User
Connect to the device with telnet using read-only user (ro).
Authentication, Authorization and Accounting (AAA) for ERS and ES
November 2010
delete : N/A
set : N/A
server
create
<value>]
[timeout
server
create
<value>]
[timeout
Technical Configuration Guide
<ipaddr>
key
<value>
<value>]
[single-connection
<ipaddr>
key
<value>
<value>]
[single-connection
avaya.com
[port
<value>]
<value>]
[port
<value>]
<value>]
49
Advertisement
Table of Contents
