Table of Contents
Advertisement
Log file on TACACS+ client
I
2008-02-26 14:30:05 GMT+01:00 139
address: 10.10.50.10
I
2008-02-26 14:30:34 GMT+01:00 140
IP address: 10.10.50.10, access mode: no security
I
2008-02-26 14:30:35 GMT+01:00 141
logout), IP address: 10.10.50.10
Please note the log file does not display user login or access level. The log file does not
contain any session statistics.
3.6.2 ERS 5500 – Read-Write User
Connect to the device with telnet using read-only user (bsrw).
Telnet to Switch with read-write user (bsrw) type some commands
5510<level-5>> en
5510<level-5># show clock
Current SNTP time
Daylight saving time is DISABLED
Time Zone is set to 'METD', offset from UTC is 01:00
5510<level-5># config t
Enter configuration commands, one per line.
5510(config)<level-5># interface fastEthernet all
5510(config-if)<level-5># exit
5510(config)<level-5># exit
5510<level-5># exit
Read-write user in this example does have access to switch configuration.
Log file on TACACS server - /var/log/tac_acc.log
Tue Feb 26 14:35:12 2008
10.10.50.10
Tue Feb 26 14:35:49 2008
10.10.50.10
elapsed_time=38 reason=User logged out
Authentication, Authorization and Accounting (AAA) for ERS and ES
November 2010
:
2008-02-26 14:35:28 GMT+01:00
10.10.55.6
start
reason=User logged in
10.10.55.6
stop
start_time=1632263
Technical Configuration Guide
#1 Successful connection from IP
#1 Session closed (user logout),
#1 Connection closed (user
End with CNTL/Z.
bsrw
Telnet Session 1
bsrw
Telnet Session 1
stop_time=1632301
avaya.com
52
Advertisement
Table of Contents
