Table of Contents
Advertisement
Please note that the log file only displays the user access level (read-only). The log file does not
contain any session statistics.
2.5.3 ERS 2500, 4500, 5500 – 802.1x (EAP) User
For this example, we will connect an 802.1x (EAP) supplicant to the switch, authenticate the EAP
supplicant, generate some traffic, and then disconnect.
Log file on RADIUS server - /var/log/radius/radius.log
Thu Feb 21 17:17:22 2008 : Auth: Login OK: [eap] (from client 4548GT-PWR port
1 cli 00-12-3F-1A-1B-68)
Log file on RADIUS server - /var/log/radius/radacct/10.10.44.5/auth-detail-20080221
Optional file, need to configure /etc/raddb/radiusd.conf
Thu Feb 21 17:17:22 2008
NAS-IP-Address = 10.10.44.5
NAS-Port-Type = Ethernet
Service-Type = Framed-User
Message-Authenticator = 0x88721799b12354d60b8336ab285dda67
NAS-Port = 1
Framed-MTU = 1490
User-Name = "eap"
Calling-Station-Id = "00-12-3F-1A-1B-68"
EAP-Message = 0x02ff000801656170
Client-IP-Address = 10.10.44.5
Timestamp = 1203610642
Thu Feb 21 17:17:22 2008
NAS-IP-Address = 10.10.44.5
NAS-Port-Type = Ethernet
Service-Type = Framed-User
Message-Authenticator = 0xf59f53234959a19e91f76475e3d9ab6d
NAS-Port = 1
Framed-MTU = 1490
User-Name = "eap"
Calling-Station-Id = "00-12-3F-1A-1B-68"
State =
0x554445eb4da34e4372ab674424c945d712a4bd47826574a783596a949d917a931b1f5c81
EAP-Message = 0x0200001904108317b45b9526d49bd52c243c7b96bd1c656170
Client-IP-Address = 10.10.44.5
Timestamp = 1203610642
Authentication, Authorization and Accounting (AAA) for ERS and ES
November 2010
Technical Configuration Guide
avaya.com
20
Advertisement
Table of Contents
