Table of Contents
Advertisement
3.6.4 ERS 1600, 8300 – Read-Write User
Connect to the device with telnet using read-only user (rwa).
Telnet to Switch with read-write user (rwa) type some commands
8300:5# show date
local time:
TUE FEB 26 17:33:03 2008 METDST
hardware time: TUE FEB 26 16:33:03 2008 UTC
8300:5# config ?
Sub-Context: bootconfig cli diag ethernet filter ip lldp log mlt nsna ntp poe
radius rmon
slot slpp stg sys snmp-v3 snmp-server tacacs vlan web-server qos
Current Context:
auto-recover-delay <seconds>
info
load-encryption-module <3DES|DES|AES>
setdate <MMddyyyyhhmmss>
8300:5# exit
Read-write user in this example does have access to switch configuration.
Log file on TACACS server - /var/log/tac_acc.log
NO ENTRY.
Please note that ERS 1600 and 8300 does not support TACACS+ accounting.
Log file on TACACS server - /var/log/tac_plus.log
Depends on debug value configured /etc/rc5.d/S99tac_plus
Tue Feb 26 17:27:24 2008 [16484]: verify: login access for user 'rwa' to port
on 10.10.50.5 from 10.10.50.5
Tue Feb 26 17:27:24 2008 [16484]: cfg_check_host_group_access: checking login
access to host '10.10.50.5' for user 'rwa'
Tue Feb 26 17:27:24 2008 [16484]: cfg_check_host_group_access: access
permitted because host not defined
Tue Feb 26 17:27:24 2008 [16484]: verify: using user/group auth parameters
Authentication, Authorization and Accounting (AAA) for ERS and ES
November 2010
Technical Configuration Guide
avaya.com
57
Advertisement
Table of Contents
