Table of Contents
Advertisement
Log file on RADIUS client
8600A:6# show log file
CPU6 [02/21/08 18:08:08] SW INFO user ro connected from 10.10.50.10 via
telnet
CPU6 [02/21/08 18:09:30] SW INFO Closed telnet connection from 10.10.50.10,
user ro rcmd -2
2.5.5 ERS 1600, 8300 and 8600 – Read-Write User
For this example, we will connect to the switch using telnet via a read-write (rwa) user.
Telnet to Switch with read-write user (rwa) type some commands
8600A:6# show date
local time:
THU FEB 21 18:24:20 2008 METDST
hardware time: THU FEB 21 17:24:20 2008 UTC
8600A:6# config ?
Sub-Context: atm atmcard bootconfig cli cluster diag r-module ethernet fdb
filter ip ipv6 ipx lacp log mlt naap ntp pos poscard qos radius rmon slot
slpp snmp-server snmp-v3 stg sv lan sys vlacp vlan web-server
Current Context:
auto-recover-delay <seconds>
info
load-encryption-module <3DES|DES|AES>
mac-flap-time-limit <milliseconds>
setdate <MMddyyyyhhmmss>
8600A:6# exit
Read-write user in this example does have access to switch configuration.
Log file on RADIUS server - /var/log/radius/radius.log
Thu Feb 21 18:24:16 2008 : Auth: Login OK: [rwa] (from client 8600 port 1)
Log file on RADIUS server - /var/log/radius/radacct/10.10.50.1/auth-detail-20080221
Optional file, need to configure /etc/raddb/radiusd.conf
Thu Feb 21 18:24:16 2008
User-Name = "rwa"
NAS-IP-Address = 10.10.50.1
NAS-Port = 1
Client-IP-Address = 10.10.50.1
Timestamp = 1203614656
Authentication, Authorization and Accounting (AAA) for ERS and ES
November 2010
Technical Configuration Guide
avaya.com
24
Advertisement
Table of Contents
