Options - Crutch Holder; Options - Therapy Table; Options - Stabilising Bar; Options - Transit Wheels - Sunrise Medical Breezy BasiX2 Directions For Use Manual

Options - Crutch holder

CRUTCH HOLDER
This device permits crutches to be
transported directly on a wheelchair.
It has a Velcro loop to fasten
crutches or other aids (Fig. 38).
WARNING!
Never try to use or attempt to
remove the crutches or other aids
while moving.

Options - Therapy Table

THERAPY TABLE
The tray provides a flat surface for
most activities. Before using a tray, it
first has to be adjusted to the width
of the seat by an authorised dealer.
The user must be sitting in the
wheelchair during this adjustment
(Fig. 39).

Options - Stabilising Bar

STABILISING BAR
Open star-knob (1) and swing the
stabilising bar (2) out of the way
before folding the chair.
To reinstate the wheelchair, reverse
the above procedure.
DANGER!
• Before using the wheelchair
ensure that the stabiliser bar
and star-knobs are in place and
are tightened correctly.
• Never use the stabiliser bar to lift the chair!
Options – Transit wheels
TRANSIT WHEELS
Transit wheels should be used
wherever your wheelchair would be
too wide if the rear wheels were used
(e.g., in airplanes, buses, etc.). After
the rear wheels have been removed
with the aid of the quick-release
axles, the transit wheels can
immediately be used to continue
riding. The transit wheels are
mounted so that they are approx. 3
centimeters above the ground when
not in use. They are thus out of the
way when riding, transporting or when tipping to pass over obstacles
(e.g., kerbs, steps, etc.) (Fig. 41).
DANGER!
Your wheelchair does not have any wheel locks when the transit
wheels are being used.
18 BasiX
2
Fig. 38
Fig. 39
Fig. 40
2
1
Fig. 41

Name Plate

Nameplates
The nameplate is located on either the cross-tube assembly or the
transverse frame tube, as well as on a label in the owner's manual.
The nameplate indicates the exact model designation and other
technical specifications. Please provide the following pieces of
information whenever you have to order replacement parts or to file
a claim:
SAMPLE
BasiX
2
BasiX
2
Product Name/SKU Number.
Maximum safe slope with anti-tips fitted,
Depends on wheelchair setting, posture and
physical capabilities of the user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User's Guide.
Crash Tested
Date of manufacture.
Serial number.
Due to our policy of continuous improvement in the design of our
wheelchairs, product specifications may vary slightly from the
examples illustrated. All weight/dimensions and performance data
are approximate and provided solely for guidance.
Sunrise Medical complies with the EU Medical Devices Directive
93/42/EEC
All wheelchairs must be used in accordance with the
manufacturer's guidelines.
Sunrise Medical GmbH & Co.KG
Kahlbachring 2-4
69254 Malsch/Heidelberg
Germany
Tel.: +49 (0) 7253/980-0
Fax: +49 (0) 7253/980-111
www.sunrisemedical.com