Paint Retouching Of The Tanks And Manifolds; Cleaning The Secondary Filter - Netafim SANDSTORM User Manual

MAINTENANCE

Paint retouching of the tanks and manifolds

WARNING
If the protective coating (inside and outside) of the tanks and manifolds is damaged and the bare
metal is exposed, it will rust in contact with irrigation water and chemicals. If neglected, this will
lead to a leak.
A tin of polyester protective repair paint (color: RAL 5010) is supplied with the system.
Any damage to the protective coating of the tanks and manifolds must be repaired as soon as possible.
1. Sand the damaged area or spot with sandpaper and clean it with a wire brush.
2. Apply the protective paint.
3. Let the paint completely dry for at least 24 hours before exposing the mended spot to water.
For further assistance, contact your local Netafim™ representative.

Cleaning the secondary filter

At the end of the irrigation season and during the irrigation season, at the frequency required by the
irrigation water quality.
Remove the filtration element from the filter casing and clean it according to the instructions in the filter
user manual.
16 SANDSTORM SINGLE-/DOUBLE-CHAMBER USER MANUAL
™