Hi/Lo Alert; Technical Data - Bresser 7002530 Instruction Manual

21 HI/LO Alert

HI/LO alert are used to alert you of certain weather conditions. Once activated, the alarm will turn on
and the indicator light starts flashing when a certain criterion is met. The following are areas and type
of alert provided:
Area
Indoor temperature
Humidity (indoor)
Outdoor temperature
Rainfall (hourly)
Rainfall (daily)
HI AL = High alert / LO AL = Low alert
*Daily rainfall since midnight
HI/LO alert setting
1. Press ALERT button until the desired area is selected.
2. Press UP or DOWN button to change the value.
3. Press ALERT button to confirm and continue to the next setting.
Enable/Disable HI/LO Alert
1. Press ALERT button until the desired area is selected.
2. Press ALARM button, to activate the alarm.
3. Press ALERT button to confirm and continue to the next setting.
Note:
1. The unit will automatically exit setting mode in 5 seconds if no button is pressed.
2. When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and
the alarm will sound for 2 minutes.
3. Press SNOOZE/LIGHT button when alarm sounds to interrupt the alarm. The alarm will then start
again after 2 minutes.
Data clearing
1. Press and hold HISTORY button for approx. 3 seconds.
2. Press UP or DOWN button to choose YES or NO.
3. Press HISTORY button to confirm. This will clear out any rainfall data recorded before.

22 Technical data

Main unit
Batteries
Temperature unit
Temperature measuring range
Humidity measuring range
Time display
Time format
Calendar display
Dimensions
Type of alert available
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL
HI AL*
2x AA, 1.5 V
°C / °F
-10°C - 50°C
20% - 90%
HH:MM:SS / Weekday
12 or 24 hours
DD/MM/YR or MM/DD/YR
95 x 155 x 23 mm (W x H x D)
29 / 32