Manual Time Setting; Alarm Setting; Snooze Function; Receiving Measurements Automatically - Bresser 7002530 Instruction Manual

13 Manual time setting

To set the time / date manually, first disable the reception of the time signal by pressing the RCC but-
ton for approx. 8 seconds.
1. Press and hold CLOCK button for approx. 3 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press CLOCK button to confirm and continue to the next setting.
5. Settings order: 12/24-hours mode > Hours > Minutes > Year > Month and Day > Day and Month >
Time offset > Language > Daylight Saving Time (DST)
6. Finally press the CLOCK button to save the settings and exit the setting mode.

14 Alarm setting

Turn on/off Alarm clock (and Ice Alert function)
1. Press ALARM button to show the alarm time.
2. Press the ALARM button again to activate the alarm.
3. Press the ALARM button one more time to activate the alarm with ice alert.
4. To disable the alarm and ice alert, press the ALARM button until the alarm icons disappear.
Set Alarm time
1. Press and hold ALARM button for approx. 2 seconds to enter the alarm time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press ALARM button to confirm and continue to the next setting.
5. Settings order: Hours > Minutes
6. Finally press the ALARM button to save the settings and exit the setting mode.
7. Press SET button to activate the alarm. The symbol will be displayed. The alarm is activated.
8. Press SET button again to disable the alarm. The symbol
abled.

15 Snooze function

1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will
sound again in 4 minutes.
2. Press AARM button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.

16 Receiving measurements automatically

Once batteries are installed, the base station will display the measurement readings. Readings from
the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
will not be displayed. The alarm is dis-
27 / 32