Table of Contents
Advertisement
7.
Specifications
Item
Applied Part
Battery Life
Method of Cleaning and
Disinfection
Water ingress protection
Duty Cycle
Power Source
SEM Value Range
SEM Value Repeatability*
Storage
Operating Conditions
Charging Mat AC Mains Voltage
Charging Mat Mains Current
*
Repeatability is the variation of a single device in measuring the same location by
the same person when multiple measurements are taken one after the other ("repeat") at
Specifications
Type BF
3 hours (typical)
Clean the device as defined in Section 4
IPX1
Continuous operation
Internally powered equipment
0.3 to 3.9 SEM Value units
+/- 0.2 SEM Value units
The SEM Scanner 200 should only be stored at temperatures
ranging from -4ºF (-20ºC) to 113ºF (45ºC) at 5% to 90%
relative humidity (non-condensing).
The SEM Scanner 200 should only be operated at temperatures
ranging from 59ºF (15ºC) to 95ºF (35ºC) at 5% to 90% relative
humidity (non-condensing).
100-240 V
0.35 A
that time.
Table 13. Specifications
Page 35 of 36
OTH-SEM-IFU-
ENGLISH (EU)
MULTI-LANG-0123 Rev D,
January 2018
Advertisement
Table of Contents
