Operating Instructions; Unpacking And Inspection; Charging The Device - BBI SEM Scanner 200 Instructions For Use Manual

ENGLISH (EU)
3.

Operating Instructions

3.1. Unpacking and Inspection

After the SEM Scanner 200 is unpacked verify that the scanner has no signs of damage. If there
are signs of damage, contact Customer Service.

3.2. Charging the Device

The device must be charged before using it for the first time, leave the device on the charging
mat for at least 6 hours to completely charge the battery prior to initial use.
The device also needs to be charged if the SEM Scanner 200 screen displays a red, low battery
icon (
Low battery
Figure 6).
Page 12 of 36
MULTI-LANG-0123 Rev D,
OTH-SEM-IFU- January 2018