BBI SEM Scanner 200 Instructions For Use Manual page 10

Risk of loss or damage during shipments under this warranty shall be borne by the party shipping
the Product. Products shipped by the Purchaser under this warranty shall be suitably packaged
to protect the Product. If Purchaser ships a product to BBI in unsuitable packaging, any physical
damage present in the Product on receipt and inspection by BBI, and not previously reported,
will be presumed to have occurred in transit and will be the responsibility of the Purchaser.
Exclusions
This warranty is limited to defects and materials that can be attributed to a fault or defect within
the SEM Scanner 200.
This warranty does not extend to any Warranted Products or parts thereof: (a) that have been
subject to misuse, neglect or accident, (b) that have been damaged by causes external to the
Warranted Product, (c) that have been used in violation of the BBI Instructions for Use, (d) on
which the serial number has been removed or made illegible, (e) that have been modified by
anyone other than BBI or its authorized service center, unless authorized prior to such service
by BBI, (f) that are equipment sold as used, or (g) that are exposed to agents listed in Table 2,
below. Table 2 is not an exhaustive list of agents which may compromise the integrity of the SEM
Scanner 200.
Benzene
Carbon tetrachloride
Chlorobezene
Chloroform
Table 2. Agents That Should Never Be Used on The SEM Scanner 200
Disclaimer of Additional Warranties
No distributor, dealer or other party is authorized to make any warranty on behalf of BBI, or to
assume for BBI any other liability with respect to the SEM Scanner 200.
The contents of these Instructions for Use do not constitute a warranty.
Severe Effect – NOT Recommended
Cyclohexane
Ethyl Chloride
Freon
Gasoline, unleaded
Page 10 of 36
OTH-SEM-IFU-
Kerosene
Trichloroethylene
Lacquer
Naphtha
MULTI-LANG-0123 Rev D,
ENGLISH (EU)
Nitric Acid – 70%
Perchloroethylene
Toluene
Xylene
January 2018