Selecting.the.vent.option; Top Vent To 6" Pipe Duct; Top Vent To 3.25" X 10" Plenum Duct - Pacific AK-9800 User & Installation Manual

Installation: Select Vent Option
Selecting the Vent Option
The AK-9800/EP-9800 must be installed using a top vented round pipe. The PR-3330/
PR-3030/EP-3030 and EP-3330 can be vented with either top or back options. Using the
guide below, select the type of venting option required for your installation and install it on
to the range hood.

Top vent to 6" pipe duct:

When connecting to a pipe from the top
of the unit, place the adapter collar over the
pre mounted tube outlet. The unit is now
ready for installation.
Top Vent to
3.25" x 10" plenum duct
The unit will ship with a top vent to 6"
pipe duct as standard. To convert the unit
to a top vent with square plenum duct fol-
low the steps outline below:
1. Remove the
adapter.
. Remove the screws holding down the
vent guides.
3. Remove the vent guides.
Page 1
existing transition
EP-9800 Shown