Important Safety Notices; Installation; Safe.operation; Cleaning.the.unit - Pacific AK-9800 User & Installation Manual

SAFETY NOTICES

iMportant saFety notiCes

This product is intended to be installed by qualified persons such as trained service
technicians or persons with both electrical and mechanical installation background.
If you do not have this background, DO NOT attempt to install this unit or severe personal
injury could result.

Installation:

1. All Electrical wiring should be installed according to national and local electrical
codes.
. It is strongly recommended that old duct work not be re-used. The accumulation of
grease and dirt may pose a fire hazard. To avoid vent restriction resulting in de-
graded performance of your range hood, old duct work less than 6" diameter or
3.5 x 10" plenum, must never be re-used.
3. Check all sections and joints of the duct work to ensure proper connection and all
joints are correctly taped and secured.
Safe Operation
. Read all instructions contained in this manual before you operate the unit. Save this
manual for future reference.
5. NEVER operate the unit with the safety grilles removed. Operating blowers have
very strong extraction power, which could cause hair, fingers, clothing or other
loose articles to be drawn towards the fan blades.
6. NEVER dispose foreign substances, including cigarette ashes or combustibles, into
the blowers. This practice may cause grease fires in the duct work.
Cleaning the Unit
7. Always follow the correct procedures outlined in this manual to remove grease and
residue from the residue cups and fan blades (see page 10).
8. NEVER operate the fans with the grilles removed.
9. NEVER disassemble the fan blower assembly to clean it. This practice is hazardous
and will void the warranty. Pacific Range Hood Limited accepts no liability for neg-
ligence caused by this practice. If the fan housing requires service, call our Service
Center at 1-866-808-8008 for further instructions.
Page 
wa r n i n g
saFety iteMs to note