Connecting An External Monitor Or Projector (Optional); Connecting An External Projector - Smart Technologies SMART Board 4000i Installation Manual

Connecting an External Monitor or Projector (Optional)

You can send the video signal to another RGB video source, such as an external projector or
a monitor. To do this, connect a 15-pin male video cable (not provided) from the external
projector or monitor to the 15-pin female video Outputs port on the connection panel. This
connection is for RGB output only.
External Projector
TIP
30
Figure 17: Connecting an External Projector
You may need to activate the projector's video output by pressing a button on
the projector's remote control.
Setting Up the 4000i
Video Cable
Video OUT
Printer / Network
Outputs
Auxiliary
Inputs
S-Video
S-Video
Computer 2 Inputs