First Installation - Kathrein UFS 924 Operating Instructions Manual

Before you start to use the UFS 924, read the sections "Safety instructions -
Important instructions", "Important information" and "Connection and set-up"
through to the item "First Installation".
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance provided in the "First Installation" section assumes that the receiver has been
properly connected as per the "Safety Instructions - Important Information" and "Connection
and set-up" sections through to the "First Installation" section.
Buttons required for remote control during f rst installation:
 
...

(red)


First switch your TV set on and select the AV-/HDMI input you have used to connect the receiver to
your TV set. Switch on the receiver at the power switch on the rear of the unit. Now perform the
installation. If you have any questions or encounter problems, contact your specialist dealer.
The following on-screen display appears:
Tip!
Always pay attention to the bar at the
bottom of the on-screen display. Messages
here provide information on what to do
next.

Use the buttons to select the desired menu language for your UFS 924 and con
your selection using the
languages are available: German, English, French, Italian, Spanish, Czech, Dutch, Polish,
and Russian.
12
Connection and setup

First installation

Number input
Go back one step in the
f rst installation
Select/change individual
menu parameters, navigation
Cancel input, go back

button. The selected language is indicated with a tick.
Call up the next step in the

(green)
Conf rm the changed

values/setting; call up
f rst installation
the submenus
f rst
f rm
The following
Turkish