Approved Kombitools; Mounting The Loop Handle - Stihl KM 56 R Instruction Manual

Approved KombiTools

The following STIHL KombiTools may
be mounted on the KombiEngine:
KombiTool Application
FS-KM Brushcutter with
mowing head
1)
FS-KM Brushcutter with
grass cutting blade
FSB-KM Brushcutter with
mowing head
HL-KM 145° Long reach hedge
trimmer, adjustable
HL-KM 0° Long reach hedge
trimmer
FH-KM 145° Power scythe
BG-KM Blower
HT-KM Pole saw
BF-KM Cultivator with pick
tines
FCB-KM Edger
FCS-KM Edger
SP-KM Special harvester
KB-KM Bristle brush
KW-KM PowerSweep
1)
the barrier bar on the loop handle
supplied with the machine must be
used – see also "Mounting the Loop
Handle"
KM 56 R, KM 56 RC

Mounting the Loop Handle

The loop handle comes in two different
versions.
Version A
A factory-new machine comes with the
loop handle already mounted.
Using the Barrier Bar
The barrier bar comes standard with the
machine and must be mounted to the
loop handle.
Mounting the Barrier Bar
1
3
Fit the washer (1) on the M5x23
N
screw (2).
Hold the barrier bar (3) against the
N
loop handle and insert the screw
with washer.
Tighten down the screw (2) firmly.
N
Leave the barrier bar permanently
mounted to the loop handle.
English
0.2 in
(5,3 mm)
2
7