Dimplex PWD 750 Installation And Operating Instructions Manual page 27

Technical data
Nominal volume
Heat exchanger surface area
Height
Width
Depth
Diameter
Tilting dimension
Permissible operating temp., heating water
Permissible operating pressure, heating water
Permissible operating temperature, DHW
Permissible operating pressure, DHW
1
Heat loss
Weight of tank
1. Room temperature 20°C; cylinder temperature 50°C
Connections
Cold water
DHW
Circulation
De-aeration
Heating water flow
Heating water return
Anode diameter
Immersion heater
Flange heater
Immersion sleeve
Pouring output
1
Buffer tank temperature
53 °C
48 °C
1. Initial temperature above the circular plate
2. The hot water volumes are based on a mean hot water temperature of 40°C
at a flow of 15 l/min. Cold water inlet temperature 10°C. In contrast to bath tub
operation, the outlet temperature of 40 °C is not undershot at the hot water
extraction point in shower operation.
Different hot water sensors must be used depending on the
type of heat pump manager present in the heat pump
system.
WPM 2006 with integrated display and round buttons
=> standard NTC-2 sensor
WPM 2007 with removable control panel and rectangular buttons
=> NTC-10 sensor
750 l
1,730 mm
790 mm
1,920 mm
95 °C
3 bar
120 °C
20 bar
246 kg
3/4" external
thread
3/4" external
thread
optional 3/4"
1 1/4" internal
thread
1 1/4" internal
thread
1 1/4" internal
thread
1 1/2" internal
thread
1 1/2" internal
thread
1/2" internal
thread
Pouring output during shower
2
operation
280 l
190 l
1.2
A-V