Installation
3.6 Install the collecting tray and humidity sensor
3.7 Install the reagents
32
Electrocution hazard. Always remove power to the instrument before making electrical
connections.
Refer to the illustrated steps that follow.
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to the
current safety data sheets (MSDS/SDS) for safety protocols.
Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local,
regional and national regulations.
Carefully read the labels on the bottles to make sure that the reagents are correct or damage to
the instrument can occur.
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E