Flight Plan - ehang Falcon-B410 User Manual

Flight Plan

Step 1: Tap "+" to create new flight paths.
Step 2: Tap "Rename" on the top right corner to change the
name of flight path. The first action of executing the flight
path is "Take off", please DO NOT change it.
Step 3: Tap "+" on the right or double tap on the map to add
waypoints. You can change the waypoint location by dragging
it to a different position on the map. On the bottom right
corner, you can adjust the waypoint parameters including the
longitude, latitude, relative altitude, hovering duration, etc.
Step 4: Unfold the "Property" tab and set the flight missions
at the waypoint based on your needs.
Step 5: Tap "+" on the right or double tap on the map to
continue adding waypoints.
Step 6: As indicated below, drag
order. Please DO NOT make any change of the first flight
mission "Take off".
27
to adjust the waypoints