ehang Falcon-B410 User Manual page 23

EHANG Pro Software Configuration and Application
5. Tap the Dropdown icon as indicated.
Click the Dropdown icon,
you'll see a popup menu of
Connection Method
6. To use 4G connection mode, tap "Customer IP",
enter the IP address provided by EHANG in the
new interface, tap "OK", then tap "Connect", wait
for several seconds until it automatically finishes
connection.
7. After successfully connected, the page will
redirect to the main interface.
8. Back to the main interface, check whether the
drone is properly receiving data:
a. Check whether the "Heartbeat" beats;
b. Check whether it's set to "Self-stabilization"
mode;
c. Check the drone's detailed status;
d. Check whether the GPS positioning aligns with
the drone's current position.
19