Touch-To-Go Flight - ehang Falcon-B410 User Manual

Touch-to-Go Mode
Adjust the flight altitude via the altitude adjustment bar at the bottom right corner, then select (single tap
the map) the flight destination on the map, tap the "Go" that appears on your selected point, the drone
will fly towards the destination.
The blue line represents the preset flight path, and the white line represents the route already covered
by the drone. In case of emergency, tap the "Hover" button immediately.
Note: After tapping the "Hover" button, the drone will glide a bit instead of hovering instantly, so please be
cautious about the surrounding environment, and make sure there is no obstacles in the flight path. The
gliding distance depends on the flight speed. Faster/lower speed means longer/shorter gliding distance.
25