Removal - ehang Falcon-B410 User Manual

Gimbal Installation and Removal
3. As shown below, follow the arrow direction to
push and tighten the gimbal to the drone.
4. Turn clockwise and tighten the screws on the
two sides of the gimbal.
5. Place the drone on a flat surface, gently shake
the gimbal to check whether it is tightly secured
and successfully installed.

Removal

1. Untie the cables that connect the gimbal
respectively with the drone
tion module.
2. Loosen the screws and remove the gimbal.
10
and the communica-
1
2
1
2