EHANG Pro Software Configuration and Application
Acquire Registration Code
The registration codes are provided by EHANG, also applicable for registration in computers. Each registra-
tion code can only be used for limited times, please keep your code well.
Connect Devices
There are two ways to connect a drone with the software. See below their brief introductions.
1
Communication Box+ Falcon+ Software WIFI Connection
Communication Box
1. Turn on the drone: Place the drone on a flat
surface. Press twice and hold the power button until
the indicator light flashes to turn on the drone.
2. Turn on the ground station: Press and hold the
power button until the indicator light remains on to
turn on the ground station.
WIFI
Falcon
3. Open the software: Tap the software icon to open
the software.
4. Connect Communication Box: Search the WIFI
"EHANGBat-GND_xxxxxxxx", xxxxxxxx is the
password, type in the password to complete
connection.
16
WIFI
EHANG Pro