2. Unpacking and installation
2.3 Examining the monitor
2.3.1 Front view
An LED on the bottom right edge indicates the operating status of the monitor.
LED indicator
Orange
Green
Next the to LED indicator the sensor to receive the commands from the IR control unit is located as well as the
light sensor to determine the surrounding light intensity.
Take care that the sensors are not blocked by any objects placed in front of the monitor!
The preset for dim adjustment and bright adjustment can be set and controlled via the OSD, cf.
Value.
2.3.2 Side view
SELECT
+
-
<
>
EXIT
The control elements of monitors are located on the right (seen from front). The 7 push buttons allow switching
the monitor from and to standby, to adjust volume and to activate and operate the OSD.
Item
Refers to
1
SELECT
2
+
3
-
4
<
5
>
6
EXIT
7
2-6 _________________________________________________________ Barco - LC series - R5976934 - user's manual - Revision 05 - March 2006
Function
Standby / switch into operation
Activate selection
Scroll right for menu items / volume increase
Scroll left for menu items / volume decrease
Scroll down for menu items
Scroll up for menu items
OSD control menu button / Access Main /
Sub-menu / Quick Menu Selection
Mode
Standby
In operation
5.7.4 Light Sensor