4. Controlling
4.1 General
The monitors can be controlled via the 7 push buttons at the right or conveniently remote-controlled by the infra-
red remote control unit (RCU).
In case you want to use RS232 Remote Control, contact Barco!
The push buttons as well as the IR RCU make use of the OSD: the menu is displayed, a menu item is selected
and/or changed. Subsequently the OSD is closed again.
4.1.1 The push buttons
The push buttons are located on the right rear side of the monitor. The seven buttons are arranged in a vertical
row and have the following functions:
Push button
Refers to
1 (top most)
SELECT
2
+
3
-
4
<
5
>
6
EXIT
7
4-2 _________________________________________________________ Barco - LC series - R5976934 - user's manual - Revision 05 - March 2006
Function
Standby / switch into operation
Activate selection
Scroll right for menu items / volume increase
Scroll left for menu items / volume decrease
Scroll down for menu items
Scroll up for menu items
OSD control menu button / Access Main /
Sub-menu / Quick Menu Selection