Table of Contents
Advertisement
PAIRING A REMOTE CONTROLLER
DOWNLOADING FIRMWARE UPGRADES
Follow these steps when you unpaired a remote controller by mistake, performed a factory
reset, bought or borrowed a replacement MOD or MOD Live unit.
To pair the remote controller with MOD Live:
1.
Look on the back of the remote controller for the serial number printed on a white label.
Note the ID number.
Kirill: we should show this.
2.
If MOD Live is turned on, turn off the power button, wait for a few seconds, and then turn
the power button back on.
Wait for the prompt to press the MOD Live power button. This prompt may show one or
more remote ID numbers.
3.
Press the MOD Live power button to navigate to the remote ID that corresponds to your
remote controller. Each press of the power button will take you down to the next ID on the
list.
Kirill or Rok: we need an image of this.
4.
Wait for the counter to reach 0, and then press any button on the remote.
5.
Wait for a blue light to flash on the remote.
6.
Check that the remote is paired by looking at the status bar. Wait for the remote connection
indicator icon to turn blue.
Whenever firmware upgrades are released for MOD Live, a prompt like this appears when you
connect MOD Live to Recon HQ on your computer. Recon HQ automatically detects free
upgrades.
NOTE: You need to have an internet connection and Recon HQ application
downloaded to your Mac or PC computer in order to perform an upgrade. Make sure that MOD
Live is fully charged before you start a firmware upgrade. For best results, plug MOD Live into
the AC adapter to charge while performing the upgrade.
To perform an upgrade:
1.
Navigate to Firmware Upgrade in the PREFERENCES menu, and press SELECT.
2.
Press
when OK is highlighted.
3.
Attach the USB cable shipped with the product to your MOD Live unit and to your PC or Mac.
4.
Follow the prompts provided. If the upgrade fails, power off MOD Live and restart the
process.
Advertisement
Table of Contents
