Table of Contents
Advertisement
FIRMWARE UPGRADE
RESET ALL STATS
Whenever firmware upgrades are released for MOD Live, you will be automatically notified
when you connect MOD Live to Recon HQ on your computer.
See the section, Downloading Firmware Upgrades, later in this guide for complete
instructions.
To perform an upgrade:
Navigate to Firmware Upgrade in the PREFERENCES menu, choose OK and press SELECT.
Use Reset All Stats when you want data from your current and past use to be wiped clear
from displays. If you are confused by any data, unsure of its value and you want to start
fresh, choose this option. Reset All Stats clears all cumulative and max/min stats from
displays including CHRONO and STATS apps. Note that temperature and environmental
data obtained from MOD Live's sensors is continually refreshed and displayed. A reset
does not delete the data stored in MOD Live. You can still download your data to a Mac or
PC, and then upload it to HQ Online.
To perform a reset:
1.
Navigate to Reset All Stats using the DOWN button.
2.
Press
at the prompt.
3.
Press BACK to cancel and exit this option.
Advertisement
Table of Contents
