Recon Mod Live User Manual page 34


Check that the AC cable says Recon Instruments.

Check that the MOD Live power is turned off.

Check that the red light above the USB port appears. This shows that MOD LIVE is still charging.

Check that your PC or Mac is turned on and not in standby mode.

Check that the port on your PC or Mac is a USB 2.0 port (not a keyboard port).
Tips to prolong battery life:

Avoid using MOD Live at temperatures below -20°C (-4°F).

Turn off the power when you are not using the unit.

Use the DISPLAY OFF feature when you are not using the unit.

Turn the brightness down to 1 or 2.
Why won't my PC or Mac won't recognize MOD LIVE when I try to charge it or transfer data?
Steps to take:
1. Check the port you are using on your PC or Mac. Use the USB 2.0 port (not a keyboard port).
2. Check that the USB cable connection is tight. Unplug it and then plug it back in.
3. Unplug MOD Live from your PC or Mac, and then restart MOD LIVE: turn the power off, wait a few seconds, and then turn
the power on. Then try plugging the USB cable in again.