Table of Contents
Advertisement
REMOTE CARE
REPLACING THE REMOTE BATTERY
CHECKING WHICH REMOTE IS PAIRED WITH YOUR UNIT
UNPAIRING THE REMOTE CONTROLLER
You need to replace the remote controller's single 3-volt CR2032 battery approximately every
three years.
To replace the battery:
1.
Using a coin or flathead screwdriver, turn counter clockwise until you reach the unlock
symbol.
2.
Remove the back cover.
3.
Insert a replacement battery.
4.
Replace the back cover.
5.
Using a coin or flathead screwdriver, turn the cover clockwise until the arrow aligns with the
closed lock symbol.
Press the left or right button on the remote.
Check MOD Live's display to see if it responds.
indicator should be blue.
Follow these steps when you intend to use your remote controller with a different RECON
product or you are returning the MOD unit or the remote.
To unpair the remote from MOD Live:
1.
Hold down the MOD power button for 3 seconds.
2.
On the remote, press the right and left buttons at the same time and hold them both
until an orange light flashes on the remote.
Kirill: do we have an image?
Note that the remote controller status
Kirill: insert image of power button.
Advertisement
Table of Contents
