Table of Contents
Advertisement
SKM 9000_105x190_SP9.book Seite 11 Donnerstag, 2. Februar 2012 2:40 14
Using the SKM 9000
To check the set frequency/the selected frequency preset:
Call up the operating menu and press the
9
DOWN
button
until the "Tune" or "Preset" menu item
appears.
The set frequency/the selected frequency preset is displayed.
If the displayed value is the desired one:
Wait for 10 seconds to pass.
The RF signal is automatically activated and the transmission
mode display "HD"/"LR" lights up constantly.
If the displayed value is
not
Call up the "Tune" or "Preset" menu item.
The RF signal remains deactivated until you exit the menu item.
Set the frequency (menu item "Tune") or select a frequency
preset (menu item "Preset") and store your setting.
The RF signal is activated and the radio microphone transmits an
RF signal on the set frequency.
Activating/deactivating the automatic lock mode
(Autolock)
The radio microphone has an automatic lock mode that can be acti-
vated or deactivated via the "LOCK" menu item (see page 15).
To
permanently
activate the automatic lock mode:
Call up the "LOCK" menu item and select "On".
Store your setting by pressing the
The automatic lock mode is activated and the lock mode icon
appears on the standard display.
When the automatic lock mode is activated, you can still call up the
operating menu, use the
UP
select menu items and call up the "LOCK" menu item in order to
deactivate the automatic lock mode. If, however, you try to call up
any other menu item, the following display appears on the display
panel:
UP
button
the desired one:
A.
SET
button
0/DOWN
button
button
SKM 9000
0/
5
9
to
| 11
Advertisement
Table of Contents
