Table of Contents
Advertisement
SKM 9000_105x190_SP9.book Seite 10 Donnerstag, 2. Februar 2012 2:40 14
Using the SKM 9000
Switching the SKM 9000 on/off
To switch the SKM 9000 on:
Keep the
ON/OFF
button
B
pressed
until
Sennheiser logo appears on
the display panel 5.
The
ON/OFF
button
backlit in blue and the
"Name" standard display
(see page 15) appears on
the display panel 5. The
radio microphone transmits
an RF signal and the trans-
mission mode display "HD"/
"LR" lights up constantly:
480.000
3:59
To switch the SKM 9000 off:
Keep the
ON/OFF
button
goes off.
Remove the accupack/battery pack when the radio microphone
will not be used for extended periods of time (see page 8).
The radio microphone can only be switched off when the
lock mode is deactivated (see page 11).
Switching on the SKM 9000 on and checking the set
frequency before the RF signal is activated
Switch on the SKM 9000 by keeping the
pressed until the "Name" standard display appears.
The RF signal is not activated and the transmission mode display
6
"HD"/"LR"
flashes.
If you call up the "Tune" or "Preset" menu item within the next
10 seconds, the RF signal remains deactivated until you exit the
menu item. If you do not call up one of the mentioned menu items,
the RF signal is automatically activated after 10 seconds.
10 |
SKM 9000
the
B
is
B
pressed until the display panel
ON/OFF
button
B
B
Advertisement
Table of Contents
