Compliance - A&D BM series Instruction Manual

Compliance

1.2.
Compliance with FCC Rules
1.2.1.
Please note that this equipment generates, uses and can radiate radio frequency energy. This
equipment has been tested and has been found to comply with the limits of a Class A computing
device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide
reasonable protection against interference when equipment is operated in a commercial
environment. If this unit is operated in a residential area, it may cause some interference and
under these circumstances the user would be required to take, at his own expense, whatever
measures are necessary to eliminate the interference.
(FCC = Federal Communications Commission in the U.S.A.)
Compliance with Directives of CE mark
1.2.2.
This device features radio interference suppression, safety regulation and restriction of Hazardous
Substances in compliance with the following Council Directives
Council directive 2004/108/EC EN61326
Council directive 2006/95/EC
Council directive 2011/65/EU
The CE mark is an official mandatory European marking.
Please note that any electronic product must comply with local laws and regulations when sold or
used anywhere outside Europe.
BM series
EMC directive
EN60950 Safety of Information Technology Equipment
EN50581 Restriction of the use of certain Hazardous Substances
5