Using A Wired Headset - Icom IC-A16E Basic Manual

D Disconnecting a paired device
You can disconnect a paired Bluetooth
device if it is not being used.
1. Push [FUNC], and then hold down
[ENT]/[SET] for 1 second to enter the
Set mode.
2. Select "DISCON," and then push
[ENT]/[SET].
BT SET > DISCON
• "SUCCESS" is displayed and the
headset is disconnected.
3. Push [CLR]/[HOME] twice to exit the
Set mode.

■ Using a wired headset

Connect your headset through the optional OPC-2401 headset adapter.
PTT switch (User supplied, if necessary)
Use a PTT switch with a 3.5 mm (1/8 inch) plug.
HEADSET CONNECTION
D Unpairing a device
Before unpairing a connected headset or
device, disconnect it by following the steps
shown to the left.
1. Push [FUNC], and then hold down
[ENT]/[SET] for 1 second to enter the
Set mode.
2. Select "CONNECT," and then push
[ENT]/[SET].
BT SET > CONNECT
• A paired deviceʼs name is displayed.
L Push [MR]/[MW] to display the
Bluetooth device address.
L Push [∫] or [√] to select other paired
headsets, if necessary.
3. Push [FUNC], and then push
[CLR]/[HOME].
• "DELETE?" is displayed.
4. Push [ENT]/[SET].
5. Push [CLR]/[HOME] twice to exit the
Set mode.
OPC-2401
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Headset
(User supplied)
10