Configuring The Virtual Kvm; Disabling The Virtual Kvm - Cisco UCS C Series Configuration Manual

Disabling the Virtual KVM

Configuring the Virtual KVM

Before You Begin
You must log in as a user with admin privileges to configure the virtual KVM.
Procedure
Step 1 In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Remote Presence.
Step 3 In the Remote Presence pane, click the Virtual KVM tab.
Step 4 On the Virtual KVM tab, complete the following fields:
Name
Enabled check box
Max Sessions field
Active Sessions field
Remote Port field
Enable Video Encryption check
box
Enable Local Server Video check
box
Step 5 Click Save Changes.
Disabling the Virtual KVM
Before You Begin
You must log in as a user with admin privileges to disable the virtual KVM.
OL-22894-01
Description
If checked, the virtual KVM is enabled.
Note
The maximum number of concurrent KVM sessions allowed.
Enter an integer between 1 and 4.
The number of KVM sessions running on the server.
The port used for KVM communication.
If checked, the server encrypts all video information sent through the
KVM.
If checked, the KVM session is also displayed on any monitor attached
to the server.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
The virtual media viewer is accessed through the KVM. If you
disable the KVM console, CIMC also disables access to all
virtual media devices attached to the host.
Configuring the Virtual KVM
33