Managing Remote Presence; Configuring Serial Over Lan - Cisco UCS C Series Configuration Manual

Managing Remote Presence

This chapter includes the following sections:
•
•
•
•

Configuring Serial Over LAN

Serial over LAN enables the input and output of the serial port of a managed system to be redirected over IP.
Configure and use serial over LAN on your server when you want to reach the host console with CIMC.
Before You Begin
You must log in as a user with admin privileges to configure serial over LAN.
Procedure
Step 1 In the Navigation pane, click the Server tab.
Step 2 On the Server tab, click Remote Presence.
Step 3
In the Remote Presence pane, click the Serial over LAN tab.
Step 4 In the Serial over LAN Properties area, update the following properties:
Name
Enabled check box
Baud Rate field
Step 5
Click Save Changes.
OL-22894-01
Configuring Serial Over LAN, page 31
Configuring Virtual Media, page 32
KVM Console, page 32
Configuring the Virtual KVM, page 33
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
C H A P T E R
Description
If checked, Serial over LAN is enabled on this server.
The baud rate the system uses for Serial over LAN communication.
6
31