Cisco UCS C Series Configuration Manual page 16

Work Pane
System Event Log
Remote Presence
BIOS
User Management
Network
Communications Services
Certificate Management
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
6
• Temperature—Use this tab to view the temperature sensor.
• Voltage—Use this tab to view the voltage sensor.
• Current—Use this tab to view the current sensor.
• LEDs—Use this tab to view the state and color of the LEDs.
On the page, you can view the system event log.
There are three tabs on the page:
• Virtual KVM—Use this tab to set vKVM properties.
• Virtual Media—Use this tab to set virtual media properties.
• Serial over LAN—Use this tab to set serial over LAN properties.
There are three areas on this page:
• Actions—Use this area to configure the server boot order, recover
corrupted BIOS, and clear the BIOS CMOS.
• BIOS Properties—Use this area to view the running version of the
BIOS.
• Boot Order—Use this area to view the configured and actual boot
order.
There are three tabs on the page:
• Local Users—Use this tab to create users.
• Active Directory—Use this tab to set active directory properties.
• Sessions—Use this tab to view current user sessions.
There are two tabs on the page:
• Network Settings—Use this tab to set network properties.
• Network Security—Use this tab to set up network security.
There are three areas on this page:
• HTTP Properties—Use this area to set HTTP properties.
• SSH Properties—Use this area to set SSH properties.
• IPMI over LAN Properties—Use this area to set IPMI over LAN
properties.
There are two areas on this page:
• Actions—Use this area to generate and upload a certificate.
Overview
OL-22894-01