Table of Contents
Advertisement
User Manual
Measure set. table
Setting items
Activity Type
AT Lap
AT Pause
Target Pace
Alarm
*1
HR
*2
GPS
Screen
*1
Displayed after registering the heart rate monitor.
Settings
Value
Run (default)
Walk
ON
OFF (default)
ON
OFF (default)
ON
OFF (default)
Tones (default)
OFF
ON
OFF (default)
-
Screen1
Screen2
Screen3
Display Lap Screen
Explanation
Set when running or jogging.
Set when walking (exercising at a slow pace).
When a distance set in advance is reached, this function
records laps automatically.
Set the lap distance.
Distance: 0.1 to 10.0 km (in increments of 0.1 km)
"Recording Laps Automatically (AT Lap Function)"
U
on page 38
This function automatically stops measuring when you
stop running, and resumes when you continue running.
"Automatically Start/Stop Measuring (AT Pause
U
Function)" on page 40
Set the target time and pace range for one kilometre/
mile. An alarm sounds if you are outside the set pace
range.
You can set three target paces within the following
range.
Target Pace: 1'00" to 15'00"/km or miles (in increments of
1 second)
Pace Range: 00'05" to 03'00"/km or miles (in increments
of 1 second)
"Setting a Pace and Measuring (Target Pace
U
Function)" on page 41
Set the alarm type and time (1 to 10 minutes).
You can also set this from Sys. Settings.
You can measure your heart rate by wearing the heart
rate monitor (optional).
"Measuring Heart Rate" on page 51
U
Displays the number of GPS satellites being accessed.
You can display up to three measurement screens. You
can change the screen pattern and the measurement
items displayed for each screen.
You can also change the Display Lap Screen.
"Screen" on page 77
U
71
Advertisement
Table of Contents
