How To Set The Time And Date - Epson SOLAR Series Manual

CAL.VS75
1/5-SECOND CHRONOGRAPH

How to set the time and date

1
VS75
S.EPSON
60
18
30
60
45 15
30
• P ull the crown out to the 1st click position.
3
VS75
S.EPSON
60
18
30
60
45 15
30
• P ull the crown out to the 2nd click position when
the second hand is at the 12 o'clock position.
Note: While the stopwatch is running or has been stopped
while running, if the crown is pulled out to the 2nd click
position, the stopwatch will be automatically reset.
5
VS75
S.EPSON
60
18
30
60
45 15
30
• P ush the crown back to the normal position.
24
6
12
N 1 2
P u l l o u t t o
1st position
24
6
12
N 1 2
Pull out to
2nd position
24
6
12
N 1 2
Push back to
Normal position
2
VS75
S.EPSON
24
60
18
6
30 12
60
45 15
30
• Turn the crown clockwise until the previous day's
date appears.
Note: Do not set the date between 9:00 PM and 1:00 AM. Otherwise,
the date may not change properly.
4
VS75
S.EPSON
24
60
18
6
12
30
60
45
15
30
• Turn the crown to set the hour and minute hands.
• Turn the crown clockwise to advance the hour and
minute hands past 12:00 midnight. This will advance
the date to the current date.
• Take AM/PM into consideration when setting the
hour and minute hands to the desired time.
Recommend:
• The hands should be set to the time a few minutes ahead of the
current time, taking into consideration the time required to
adjust the stopwatch hand position if necessary.
• When setting the minute hand, first advance it 4 to 5 minutes
ahead of the desired time and then turn it back to the exact
minute(s).
4
/6
Instructions